Sets the value for Neighbor Discovery Protocol (NDP) retransmit time
retransmit-time | Specifies setting the retransmit time. |
retransmit_time | Sets the retransmit time value (range is 1–4,294,967 seconds or 1– 4,294,967,295 milliseconds). The default is 1 second. |
milliseconds | When setting the retransmit time value, specifies milliseconds as the time unit (range is 1–4,294,967,295). |
seconds | When setting the retransmit time value, specifies seconds (range is 1–4,294,967) as the time unit (default). |
The default setting for the retransmit time is 1 second. The default unit of measure is seconds.
configure neighbor-discovery cache retransmit-time 500000 seconds
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the Switch Engine v33.1.1 Licensing Guide document.